 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Multimedia ICs 3-channel 75 driver BA7660FS The BA7660FS is a 75 driver with a 6dB amplifier and three internal circuits, and provides 75 drive of composite Y signals and C signals, as well as RGB signals. Each load is capable of driving two circuits, and a sag correction function reduces the capacitance of the output coupling capacitor. The input voltage is within a range of 0V to 1.5V, enabling direct connection of ordinary D / A converter output. An internal power-saving circuit is also included which provides simultaneous muting on all three channels, and output pin shorting protection. *Applications boxes and other digital video devices DVDs, set top *Featurescoupled directly to D / A converter output. 1) Can be 2) Operates at a low power consumption (115mW typ.). 3) Internal output muting circuit. 4) Internal power-saving circuit. 5) Internal output protection circuit. 6) An internal sag correction function makes it possible to reduce the capacitance of the output coupling capacitor. 7) Each load is capable of driving two circuits. 8) The compact 16-pin SSOP-A package is used. *Absolute maximum ratings (Ta = 25C) Parameter Power supply voltage Power dissipation Operating temperature Storage temperature Symbol Vcc Pd Topr Tstg Limits 8 650 - 25 ~ + 75 - 55 ~ + 125 Unit V mW C C *Recommended operating conditions (Ta = 25C) Parameter Operating power supply voltage Symbol Vcc Min. 4.5 Typ. 5.0 Max. 5.5 Unit V 1 Multimedia ICs BA7660FS *Block diagram MUTE 1 16 VCC 15 OUTA1 INA 2 6dB 75 GND 3 14 OUTA2 INB 4 6dB 75 13 OUTB1 GND 5 12 OUTB2 N.C. 6 11 N.C. INC 7 6dB 75 10 OUTC1 MUTE (1pin) H 3ch MUTE NORMAL GND 8 9 OUTC2 L 2 Multimedia ICs BA7660FS *Pin descriptions and input / output circuits Pin. No Pin name IN OUT Reference voltage Equivalent circuit Function Muting control 1 MUTE K -- -- 15k 8k If MUTE (pin 1) is set to HIGH, muting is carried out simultaneously on all three channels. Signal input 2 4 7 INA INB INC Input video RGB, within (typ.). signals consist of composite signals, Y signals, C signals, and others. The input level is a range of 0 to 1.3 (min.) to 1.5 K -- -- 3 5 8 GND -- -- 0V GND Ground 14 12 9 15 13 10 OUTA2 OUTB2 OUTC2 -- OUTA1 OUTB1 OUTC1 K 0.9V 14pin 12pin 9pin Signal output The signal output level is (0.9 + 2 x input voltage [V]). Pins 9, 12, and 14 are the pins for sag correction. If pins 10, 13, and 15 are set to 0.2V or less, the protective circuit is triggered and the power-saving mode is accessed. 0.95V 15pin 13pin 10pin Vcc 16 VCC -- -- 5.0V Power supply 3 Multimedia ICs BA7660FS *Electrical characteristics (unless otherwise noted, Ta = 25C, VCC = 5V) Parameter Circuit current Maximum output level Voltage gain Frequency characteristic Muting attenuation Muting switching level HIGH Muting switching level LOW Symbol ICC Vom GV Gf MT VTHH VTHL Min. 11.4 2.6 5.5 - 1.0 -- 3.5 0 Typ. 22.8 3.0 6.0 0.0 - 60 -- -- Max. 34.2 -- 6.5 1.0 -- VCC 1.0 Unit mA VP- P dB dB dB V V With no signal f = 1kHz,THD = 1% f = 4.43MHz,1VP- P f = 7MHz / 1MHz,1VP- P f = 4.43MHz,1VP- P -- -- Conditions *Guaranteed design parameters (unless otherwise noted, Ta = 25C, VCC = 5V) Parameter Differential gain Differential phase Interchannel crosstalk Interchannel voltage gain differential Symbol DG DP CT GV Min. -- -- -- - 0.5 Typ. 0.5 0.5 - 60 0.0 Max. 1.5 1.5 - 55 0.5 Unit % deg dB dB Conditions 1.0VP- P reference staircase signal 1.0VP- P reference staircase signal f = 4.43MHz,1VP- P f = 4.43MHz,1VP- P *Measurement circuit 3.3V 1 2 1.2V 3 1F 1 1F 430k 2 75k 1 SW4 1F 430k 2 75k 4 6dB 75 13 75 22F 5 12 V SW2 2 6dB 75 15 22F 3 14 100F 1 16 SW1 SW16 1 2 0.1F 100F 75 V 47F A VCC 1F 1F 1 N.C. SW7 6 11 N.C. 100F 1F 430k 2 75k 7 6dB 75 10 75 22F V 9 8 4 Multimedia ICs BA7660FS *Measurement condition settings table Item Circuit current Maximum output level OUTA OUTB OUTC OUTA Voltage gain OUTB OUTC Frequency characteristics OUTA OUTB OUTC OUTAOUTB OUTAOUTC Crosstalk between channels OUTBOUTA OUTBOUTC OUTCOUTA OUTCOUTB OUTA Muting attenuation OUTB OUTC Symbol SW1 ICC VOM1 VOM2 VOM3 GV1 GV2 GV3 GF1 GF2 GF3 CT1 CT2 CT3 CT4 CT5 CT6 MT1 MT2 MT3 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 SW2 1 2 1 1 2 1 1 2 1 1 2 2 1 1 1 1 2 1 1 Switch conditions SW4 1 1 2 1 1 2 1 1 2 1 1 1 2 2 1 1 1 2 1 SW7 1 1 1 2 1 1 2 1 1 2 1 1 1 1 2 2 1 1 2 SW16 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Note 6 Note 5 Note 4 Note 3 Note 2 Measurement method Note 1 The muting switching level is substituted by carrying out the above measurement at High = 3.3V, Low = 1.2V. Note 1: Measure the circuit current when no signal is present. Note 2: Apply a sine wave of f = 1kHz to the input, and adjust the input level so that the output distortion is 1%. At this time, set the output voltage to the maximum output level of VOM [VP-P]. Note 3: Measure the output VO [VP-P] with a sine wave of f = 4.43MHz, 1VP-P applied to the input. Voltage gain GV is: GV = 20 Log (VO / VIN) [dB] Note 4: Measure the outputs VO7 and VO1 [VP-P] each with sine waves of f = 7MHz, 1VP-P and f = 1MHz, 1VP-P applied to the input. Voltage frequency GF is: GF = 20 Log (VO7 / VO1) [dB] Note 5: Measure the output VO [VP-P] with a sine wave of f = 4.43MHz, 1VP-P applied to the input. Interchannel crosstalk CT is: CT = 20 Log (VO / VIN) [dB] Note 6: Measure the output VO [VP-P] with a sine wave of f = 4.43MHz, 1VP-P applied to the input. The muting attenuation MT is: MT = 20 Log (VO / VIN) [dB] 5 Multimedia ICs BA7660FS *Application example 5V Vcc 0.1F 1 16 + 47F 75 MUTE D/A Composite Video 2 6dB 75 15 1000F + 75 3 14 D/A Composite Y 4 6dB 75 13 1000F + 75 75 5 12 D/A Chroma N.C. 6 11 N.C. 1000F + 75 7 6dB 75 10 75 8 9 When the sag correction function is used. 100F + 22F + 75 6dB 75 75 *External dimensions (Units: mm) 6.6 0.2 16 6.2 0.3 4.4 0.2 9 1.5 0.1 1 8 0.11 0.8 0.36 0.1 0.3Min. 0.15 SSOP-A16 6 0.15 0.1 |
Price & Availability of BA7660FS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |